Stainless steel filters housing fall into fixed filters and flip filters. Filter housings can be designed into upper and lower openings or left and right openings. The cartridges are made of titanium using sinter technology. Conventional connectors fall into 226 screws and M20 screws. Special specifications can be tailor made for customers based on their requirements.

pharmacopoeia general chapters has strict rules for the water to check total organic carbon and the preparation of reference solution, requiring that the calibrated instrument should be used for on-line monitoring or off-line laboratory determination for the water system, this requiring that the calibration and System Suitability Verification must be carried out regularly for the TOC analyzer.

Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria

Glove Integrity Tester GT-5.0 is based on Gt-2.0 3.0 R&D by MedIntegrity, very mature teconlogy,it is good choice for you.

Cartridge filter media is a hydrophobic PTFE membrane, applicable to pre-filtering of gas and solvent and sterilization. Its hydrophobicity is 3.75 times stronger than the erosion resistance capability of ordinary PVDF; thus, filters are applicable to pre-filtering and precise filtration of gas and solvent sterilization. At present, they are widely applied in pharmacy, food, chemical industry, and electronics, which show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. NWF cartridges also have high interception efficiency, high guarantee, and long service life.

TA-2.0 Total organic carbon (TOC) is developed on the basis of the original offline total organic carbon analysis instrument, which can meet both online and offline test modes for the users. And 3 points can be online measured switching one by one, so the application is more extensive, which can completely meet various on-site use requirements for the customers, thus greatly reducing the on-line monitoring implementation cost for the customers.

The on-line glove integrity tester WGT-1000 produced by MedIntegrity is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves. Our company has been engaged in the production and sales of filter integrity testers for many years, and the pressure control technology is very mature.
The device uses a wireless communication mode, built-in air pump and lithium battery, through systematic management, so that multiple detection units can be linked in real time. In addition to complying with the requirements of FDA and GMP and other laws and regulations, four-level authority management and electronic signature design are also set up to comply with 21CFR part 11 electronic records and electronic signature certification requirements; The history record can store more than 12000 groups, and at the same time, it has its own storage FLASH, which can transmit and save the test records in time; the structure design is simple and exquisite, no additional equipment is required, no need to remove gloves, and the glove tray can be replaced, supporting different specifications and sizes of gloves Detection. The high-precision pressure sensor is adopted, and the glove test is fast and accurate.

Capsule filters are produced using pleated processing. Their structure is impact and filter area is large, applicable to filter solutions that have slow flow rate and large volume. Capsule filters are sealed by means of melting, free from glues and adhesives and therefore will not contaminate filtrate. They will experience 100% integrity test, purified water washing, and pressure test before delivery. Materials of capsule filters are selectable.

Plate type filter consist of single plate and double plate, choose high-quality stainless steel 304 or 316L stainless steel, with a pressure tank or peristaltic pump as a source of pressure, is filtered by positive pressure, in full compliance with the GMP standard of the medicine industry, applicable to small pharmaceutical factory, food and beverage, factories and hospitals for liquid clarification and filtration sterilization. With a ladder shaped hose interface, easy to use.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

Filters are made of Micro series hydrophilic asymmetric sulfonated PES. They have universal chemical compatibility, pH range 3~11. They feature large throughput and long service life, applicable to bio-pharmacy and other fields. Before delivery, each cartridge has experienced 100% integrity test, to ensure product filter efficiency. NSS cartridges are endurable to repeated online steam or high-pressure disinfection, meeting asepsis requirements of new version GMP.

MedIntegrity of U.S.A. our quality products and service, will be your correct choice.